HOODS WITHOUT FILTER V SERIES are used more in ambient where it is not necessary to filter watersteam o other substances producing by machine in case it doesn’t make group of substances mentionned in the low of anticontamination. It is possible to use these substances applicating them on the connecting channel of the filter system adapted.

HOODS WITH FILTER F SERIES are used more in the ambient of foodstuffs (in restaurants, messes, public canteens etc.) where the steams contain big quantity of fat, easy to caten with the mechanic filter.

COMPENSATION HOODS have the same characteristics as the hoods V and F series, there is only the difference: compensation hoods have a perimeter channel with spout and dampers for air supply important for the power saving.

DOUBLE WALL HOODS don't have a filter system included, it must be installed at the lower end of the expulsion channel. This type of hood is used in particular when is necessary to install it in the stud superior 220 cm from the floorsurface. In this case the suction is advantaged to manage the capacity that use becomes more efficient without provoke the flows.

Wall hoods

Local center hoods

Double local center hoods

Wall compensation hoods

Local center compensation hoods

The hoods are manufactured in steel sheet Aisi 304 satined, protected outside and electropointed, thickness is 0,8 mm.
There are the following models:

- hoods without filter V series
- hoods with filter F series
- compensation hoods without filter CV series
- compensation hoods with filter CF series
- double wall hoods without filter DP series.

The particular profile board has been studied to ease the picking-up of steam thank to a double inclined plane. During the building we tried to limit the negative angles to decrease accumulation of the dust and to ensure more hygiene and cleanliness of the hood surface. On the upper part there are two slots in function of air capacity with the relative flange to easy the assembling to feed conduit.
There is the perimeter channel for collecting condensate.

Diagram shows how to choose the capacity of hood